Maintaining proper license plate illumination is essential for both visibility and legal compliance. The R107 uses 5W bulbs for its license plate lamps, and replacing them is a straightforward process.
Tools & Materials Needed
🛠 Tools:
- Small Phillips screwdriver
- Clean cloth or gloves (to handle the new bulb)
💡 Replacement Bulb:
- 5W bulb (Type 8212)
Step-by-Step Guide to Replacing the License Plate Lamp
1️⃣ Loosen the Screws:
- Use a Phillips screwdriver to remove both securing screws (1).
2️⃣ Remove the Lens & Gasket:
- Carefully detach the lens with gasket (2).
- Be mindful of the gasket to ensure it remains intact and properly positioned upon reinstallation.
3️⃣ Access the Bulb Holder:
- Pull down the lamp holder (3) from the left-hand (LH) side.
4️⃣ Replace the Bulb:
- Remove the old 5W bulb and insert the new Type 8212 bulb.
- Avoid touching the bulb glass with bare fingers, as oils from your skin can reduce its lifespan.
5️⃣ Reinstall the Lens & Gasket:
- Ensure that the protrusion on the lens is aligned on the left-hand (LH) side.
6️⃣ Secure the Screws:
- Tighten both securing screws, making sure the lens is firmly and evenly positioned to prevent moisture from entering.
Final Check
✅ Test the light by turning on the vehicle’s parking lights.
✅ Ensure the lens is clean and free of obstructions for maximum visibility.
✅ If the light does not turn on, check the fuse box and ensure proper bulb placement.
By following these steps, you can ensure proper illumination of your license plate, keeping your classic R107 Mercedes-Benz both stylish and compliant with road safety regulations.
