Properly opening and closing the hood of your Mercedes-Benz R107 is essential for performing routine maintenance and inspections. Follow these step-by-step instructions to ensure safety and prevent damage.
How to Open the Hood
Step 1: Locate the Hood Release Handle
✅ The hood release handle is positioned on the left side panel below the instrument panel inside the vehicle.
Step 2: Pull the Hood Release Handle
✅ Pull the handle firmly—this will release the hood to the safety catch stop.
Step 3: Release the Safety Catch
✅ Reach through the Mercedes-Benz star emblem opening on the front grille.
✅ Pull the safety catch lever behind the radiator grille in the direction of the arrow.
✅ Carefully raise the hood while ensuring the windshield wipers are resting on the windshield.
How to Close the Hood
Step 1: Lower the Hood Carefully
✅ Bring the hood down slowly and evenly to prevent misalignment.
Step 2: Push the Hood Firmly Until It Locks
✅ Press down firmly on the center front section of the hood to engage the locking mechanism securely.
🚨 Warning: Always check that the hood is fully latched before driving to prevent it from flying open while in motion.
Safety Precautions When the Hood Is Open
🚨 Stay Clear of Moving Parts:
- Avoid placing your hands near the fan, belts, and pulleys when the engine is running.
🚨 High Voltage Ignition System Warning:
- The engine has a transistorized ignition system that generates high voltage.
- Do not touch ignition components such as:
✅ Ignition coil
✅ Distributor
✅ Spark plug sockets
✅ Ignition cables
✅ Diagnostic socket
⚠️ Avoid touching these components under the following conditions:
- If the ignition is ON and the engine is turned manually
- While starting the engine
- While the engine is running
By following these steps and precautions, you can safely access the engine bay of your Mercedes-Benz R107 for inspections and maintenance. 🚗🔧
