Whether you’re dealing with a breakdown or transporting your classic R107, proper towing techniques are essential to prevent damage to your vehicle. Mercedes-Benz recommends specific towing methods to ensure safe transportation and avoid harm to the transmission, radiator, and suspension components.
Recommended Towing Methods
🚗 Flatbed Towing (Preferred Method)
The best way to tow your R107 is by flatbed transport. This method keeps all four wheels off the ground, eliminating drivetrain stress and preventing damage to the transmission, suspension, and undercarriage.
🛞 Wheel Lift Towing (Alternative Option)
If flatbed towing is not available, a wheel lift tow truck can be used. However, this requires proper positioning to prevent damage.
Towing with All Wheels on the Ground
If necessary, the R107 can be towed with all four wheels on the ground, but only under the following conditions:
✔ Transmission must be in Neutral (“N”)
✔ Towing distance must not exceed 120 km (75 miles)
✔ Maximum speed must not exceed 50 km/h (30 mph)
⚠ Long-Distance Towing Precaution:
For longer distances, disconnect the driveshaft at the rear axle drive flange to protect the automatic transmission from excessive wear or failure.
Nylon Tow Strap with Hooks 2”x20’ Car Vehicle Heavy Duty Recovery Rope 20,000 lbs Capacity Tow Rope
Towing Precautions
❌ Avoid Sling-Type Towing
- Never use sling-type towing equipment—this method will damage the radiator, supports, and bodywork.
- Only flatbed towing or wheel lift towing should be used.
⚠ Always attach tow hooks properly
- Front towing eye: Located on the passenger side below the front air dam.
- Rear towing eye: Located on the passenger side below the rear bumper.
🚨 Safety Tips
- Engage the parking brake before loading onto a flatbed.
- Secure the vehicle properly using soft straps or wheel chocks.
- Turn off electronics and accessories before towing.
Conclusion
When towing your Mercedes-Benz R107, always prioritize flatbed towing to protect its drivetrain and bodywork. If emergency towing is required, follow the manufacturer’s guidelines to prevent transmission damage and ensure safe transport.
